Buying heavy equipment Squamish to PembertonCall 236-709-3961

Mini · midi · full-size

Excavator Removal in Whistler and Pemberton

Whether it's a mini excavator that dug its last foundation or a full-size track machine parked since the last big job, we buy excavators across the Sea to Sky and haul them out.

What are you getting rid of?

Tell us what it is and where it sits. We call back with a number.

Does it run?
Rough weight

Rather talk? Call 236-709-3961. We only use your details to quote this machine.

  • Running, tired or seized
  • Buckets, thumbs and breakers too
  • Job sites, yards and private land

Size guide

How each size moves

Mini excavator
Under 6 tonnes. Fits on a flatbed or tilt deck.
Midi excavator
6 to 10 tonnes. Tilt deck or small lowbed.
Full-size excavator
Over 10 tonnes. Lowbed, sometimes with attachments off.
Won't track
Winched or lifted on. Tell us up front.

What we haul

Excavators of every size

Excavators carry a lot of steel, and even a tired one has value. We buy them from contractors, landscapers, farms and private owners, whether it digs all day or hasn't moved in years.

SizeTypical weightHow it travels
Mini excavatorUnder 6 tonnesFlatbed or tilt deck
Midi excavator6 to 10 tonnesTilt deck or small lowbed
Full-size excavatorOver 10 tonnesLowbed trailer

Wide or very heavy machines can need a permit for the highway. We sort that out before booking, not on pickup day.

Why people sell

Broken, worn out or just not needed

  • Final drive or swing motor failure
  • An undercarriage that would cost more than the machine is worth
  • Hydraulic pump or cylinder problems
  • High hours after years of site work
  • A project wrapped up and the machine sits idle
  • Upgrading to a newer or bigger unit

None of those stop us from buying it. Tell us what's wrong and we'll price it as is.

Buckets and attachments

Send the attachments along with the machine: digging and clean-up buckets, thumbs, hydraulic breakers, compaction plates and quick couplers. Extra attachments from the same site can go on the same load.

Loading

If it can't track onto the truck

A running excavator walks onto the deck. One with a dead engine or seized tracks has to be winched or lifted, which takes more planning, so tell us up front. Mention whether the boom is up or down, whether the tracks turn, and how soft the ground is around it.

On a sloped Whistler lot or a muddy site in the Pemberton Valley, ground conditions matter. After heavy rain we may suggest waiting a few days so a truck can get close without sinking.

Got a skid steer or backhoe on the same site? We can take it in the same trip. See skid steer, loader and backhoe removal.

How it works

Three steps, one pickup

  1. Send the details

    Use the form at the top or call. Make, model, roughly how heavy, and whether it runs.

  2. Get a number

    We may ask for a photo or two, then call back with an offer for the machine as it sits.

  3. We load it and go

    We book a truck that suits the machine and the road, load it, strap it and leave the spot clear.

Questions

Excavator removal FAQ

Do you buy excavators with a blown engine or final drive?

Yes. We buy excavators with major mechanical problems. Tell us what's failed and we'll quote it as it sits.

Do you take the buckets and attachments too?

Yes. Buckets, thumbs, breakers and couplers can go with the machine, and they're part of what we look at when we price it.

What if the excavator can't move under its own power?

We can winch or lift it, but that changes the truck and the time we need. Let us know when you ask for a quote.

Do I need to clean it first?

No. Dirt and mud are expected. Just make sure there's a clear path between the machine and where a truck can park.

Can you pick up from an active job site?

Yes. Give us the site contact and any rules about delivery hours or traffic control, and we'll book around them.

Excavator parked since the last job?

Call 236-709-3961 or send the form. We'll call back with a number for the machine as it sits.